Sign In | Join Free | My qualitytoyschina.com
China BEST PIPELINE EQUIPMENT CO.,LTD logo
BEST PIPELINE EQUIPMENT CO.,LTD
Your one stop shop for all your piping needs such as Seamless & Welded Carbon / Stainless & Alloy Steel Pipes, Mainly alloy Steel Pipes , Forged Flanges, Butt Weld Fittings, Forged Fittings,
Site Member

8 Years
Home > Slip on Plate Flange >

X2CrNiMoN17-13-3 so flanges EN 10222-5 slip on flanges 1.4429 slip on Plate Flanges

Product Categories
BEST PIPELINE EQUIPMENT CO.,LTD
Contact Now

X2CrNiMoN17-13-3 so flanges EN 10222-5 slip on flanges 1.4429 slip on Plate Flanges

Material : X2CrNiMoN17-13-3

Standard : Slip on plate flanges

Steel Number : 1.4429

Contact Now

Grade : X2CrNiMoN17-13-3
Number: 1.4429
Classification: Austenitic stainless steel - special grade
Density: 8 g/cm ³
Standard:
EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10272: 2007 Stainless steel bars for pressure purposes
EN 10269: 1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10263-5: 2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for stainless steels
EN 10250-4: 2000 Open steel die forgings for general engineering purposes. Stainless steels
EN 10297-2: 2005 Seamless circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical delivery conditions
EN 10216-5: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10028-7: 2007 Flat products made of steels for pressure purposes. Stainless steels
EN 10222-5: 2000 Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10217-7: 2005 Welded steel tubes for pressure purposes. Stainless steel tubes
EN 10296-2: 2005 Welded circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical delivery conditions
EN 10253-3: 2008 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN 10253-4: 2008 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
EN 10088-1: 2005 Stainless steels. List of stainless steels
EN 10088-4: 2009 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10088-5: 2009 Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes

Chemical composition % of steel X2CrNiMoN17-13-3 (1.4429): EN 10088-2-2005
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
C Si Mn Ni P S Cr Mo N
max 0.03 max 1 max 2 11 - 14 max 0.045 max 0.015 16.5 - 18.5 2.5 - 3 0.12 - 0.22


Mechanical properties of steel X2CrNiMoN17-13-3 (1.4429)
Rm - Tensile strength (MPa) (+A) 580-800
Rm - Tensile strength (MPa) (+AT) 580-800
Rm - Tensile strength (MPa) (+AT+C) 910-940
Rp0.2 0.2% proof strength (MPa) (+AT) 295-300
Rp0.2 0.2% proof strength (MPa) (+A) 250-315
KV - Impact energy (J) transverse, (+A) +20°
60		 -196°
60
KV - Impact energy (J) longitud., (+A) +20°
100
KV - Impact energy (J) transverse, (+AT) +20°
60-90		 -196°
60
KV - Impact energy (J) longitud., (+AT) +20°
100-120
A - Min. elongation at fracture (%) (+A) 30-40
A - Min. elongation at fracture (%) longitud., (+AT) 35-45
Nominal diameter (mm): 2 - 50
Z - Reduction in cross section on fracture (%) 55-60
Brinell hardness (HB): (+A) 250
Brinell hardness (HB): (+AT) 220


Properties of steel X2CrNiMoN17-13-3 (1.4429)
Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes
Steel shal not be applied at a metal temperature lower than -270 ° C


Equivalent grades of steel X2CrNiMoN17-13-3 (1.4429)
EU
EN		 USA
-		 Japan
JIS		 France
AFNOR		 England
BS		 Sweden
SS
X2CrNiMoN17-13-3
316LN
S31653
SUS316LN
Z3CND17-12Az
316S63
2375

Quality X2CrNiMoN17-13-3 so flanges EN 10222-5 slip on flanges 1.4429 slip on Plate Flanges wholesale

X2CrNiMoN17-13-3 so flanges EN 10222-5 slip on flanges 1.4429 slip on Plate Flanges Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: BEST PIPELINE EQUIPMENT CO.,LTD
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like